-
Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.
-
Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.
-
Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.
-
Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.
-
Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.
-
Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.
-
These wire wheel brushes are designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. The wheel shape is designed to work perpendicular to the surface, making it ideal for smaller and tighter areas. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck.
-
These wire cup brushes are designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. The cup shape works flat to the surface to cover a large surface area. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck.
-
These wire cup brushes are designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. The cup shape works flat to the surface to cover a large surface area. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck.
-
These wire cup brushes are designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. The cup shape works flat to the surface to cover a large surface area. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck.
-
This wire end brush is designed for decarbonising cylinder head ports and engine components. The bristles are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. Its size and shape makes it ideal for hard-to-reach areas such as drill holes, recesses and corners. Fitted with a 6mm round shank. Compatible with most drill drivers and drills with a 13mm chuck.
-
This decarbonising wire brush set includes a 13mm pointed and flat top brush. Designed for decarbonising cylinder head ports and engine components. The bristles are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. Its size and shape makes it ideal for hard-to-reach areas such as drill holes, recesses and corners. Fitted with a 6mm round shank. Compatible with most drill drivers and drills with a 13mm chuck.
-
Manual ranging capable of voltage, current, hEF and resistance testing. Fitted with a backlit LCD screen, auto power off, continuity buzzer and data hold features. Supplied with test leads and 1 x 6F22 9V battery.
-
Manufactured from carbon steel hardened, tempered and matt chrome plated with a five position slip joint adjustable head. Cushion grip handles. Has 'no-nip' feature which prevents handles locking together and damaging users' hands. Display packed.
-
Twin Leg Reversible Puller, 165mm Reach x 160mm Spread
-
High carbon steel, hardened and tempered with soft grip handles incorporating hang hole. Display packed.
-
Lever action gun for use with standard 400g grease gun cartridges and bulk. Supplied with delivery tube, connector with 1/8" BSPT thread and pressure relief valve. Safe working pressure 55MPa (6000psi). Display carton.
-
Chrome vanadium steel blades hardened, tempered with satin chrome plated finish and sand blasted tips. Soft grip handle with moulded inserts. Display packed in individual storage hanger with barcode on reverse. Display packed.
-
Chrome vanadium steel blades hardened, tempered with satin chrome plated finish and sand blasted tips. Soft grip handle with moulded inserts. Display packed in individual storage hanger with barcode on reverse. Display packed.
-
Rotary grinding stones suitable for use on most metals. Comprising five assorted shapes and abrasive types. Manufactured from aluminium oxide. Maximum working speeds 3000-6000 r/min. Shank diameter 6mm. Display packed.
-
Plated steel frame with finger guard. Supplied with blade. Display packed. -
Expert Quality, 6 point socket manufactured from chrome vanadium steel hardened and tempered with a micro satin finish. Each socket has a knurled ring for extra grip. Packed on a plastic hanging rail that can also be used to store the socket in a tool box.
-
Designed for use in conjunction with any 1/4" hexagon drive unit, i.e. hand, electric or air screwdrivers, to drive 1/4" and 3/8" square drive sockets. Comprises 1/4" hexagon x 1/4" square and 1/4" hexagon x 3/8" square adaptors. Manufactured from chrome vanadium steel hardened, tempered and chrome plated. Each square driver end incorporates a spring-loaded retaining ball for secure socket holding. Display packed.
-
Socket retaining bars which can be wall mounted or used loose. Manufactured from carbon steel hardened and tempered with a polished finish. Clips made from nickel plated spring steel.
-
Manufactured from chrome vanadium steel hardened and tempered, with a polished finish. 45 tooth ratchet with forward/reverse selector. Spring - loaded ball bearing enables secure socket holding.
-
Compact and lightweight PVC frame and tough polycarbonate lens provide protection from flying debris. Vented body keeps air circulating whilst working. Display packed.
-
Designed to ease the removal of 'O' rings, split pins, seals and bushes in various automotive and engineering applications. The stainless steel 240mm blades are hardened and tempered. Display packed.
-
Expert Quality, twin LED indicators identify voltage between 12 - 600V. Suitable for testing a host of wiring around the home or workplace, vehicle circuitry and electronic equipment etc. Probes fitted to 825mm of VDE approved cable. Display packed.
-
Plated steel frame with powder coating and finger guard. Supplied with blade. Display packed.
-
This revolutionary tool makes quick work of accurately aligning the clutch and pressure plate before fitting. Fits most vehicles up to 5 tons except vehicles with double plate clutches. Body manufactured from ABS with a brass screw and supplied with three collets. A full instruction leaflet is included with each tool. Display packed.
-
Suitable for most rear brake calipers. Allows the caliper piston to be wound back for the fitting of new brake pads. Five key patterns, chemically blackened finish. Display packed. NB: Not for use with calipers where pressure is required to rewind
-
Suitable for checking ignition timing on automotive, agricultural and marine engines (12V DC). Features include xenon bulb and inductive pick-up. Impact-resistant housing with on/off trigger. Display packed. NB: Not for use with motorcycles, low power, or positive earth vehicles.
-
Manufactured to DIN 338 and ISO 235/1 Specifications Expert Quality, high speed steel twist drills. Display packed.
-
Manufactured to DIN 338 and ISO 235/1 Specifications Expert Quality, high speed steel twist drills. Display packed.
-
Expert Quality, with Draper Expert HI-TORQ® ring ends cranked at 15°, except Stock Nos. 55703 to 55708 which are bi - hexagon. Long pattern forged from chrome vanadium steel, hardened, tempered, chrome plated and fully polished throughout. on header card; 6 x 7 - 20 x 22mm. Polybag with barcode label; 21 x 23 - 55 x 60mm.
-
Expert Quality, with Draper Expert HI-TORQ® ring ends cranked at 15°, except Stock Nos. 55703 to 55708 which are bi - hexagon. Long pattern forged from chrome vanadium steel, hardened, tempered, chrome plated and fully polished throughout. on header card; 6 x 7 - 20 x 22mm. Polybag with barcode label; 21 x 23 - 55 x 60mm.
-
Heavy duty webbing strap 1000mm x 38mm with 3/8" x 1/2" square drive/21mm x 13/16" AF cam for tightening. Cam has plated finish for corrosion protection. Display packed.
-
PVC with detachable flexible neck. Supplied with removable gauze filter. Aperture size of funnel mouth 140mm. Sold loose.
-
Spindle lock, Two position side handle, Adjustable guard, Supplied with side handle, hex key, disc changing spanner and 2M cable with BS plug
-
This Draper Storm Force® polisher has a 110W motor and a no load speed of 3500rpm. It is intended for domestic or light commercial use and is ideal for polishing paintwork on cars and caravans and in home improvement projects. The polisher is operated by a simple on/off switch and has a comfortable hand grip. It is fitted with a large 240mm diameter flexible sponge backing pad and supplied with one synthetic wool and one cotton polishing bonnet.
-
Part of the Draper Storm Force series, Adjustable depth, Laser guide, Supplied with 3 blades: TCT, HSS, Diamond blade, Max. cut: 27mm, Electronic brake, Dust extraction adaptor
-
Part of the Draper Storm Force series, Aluminium base plate, Parallel fence, Lock-Off switch, Dust bag and extraction facility, Soft-Grip handle, Plug and cable (2.0m), Supplied with hex key, dust bag, 2 x blades and a parallel guide
-
Variable speed, Hook and loop base with conventional sheet clamps, Dust collection box and extraction facility, Supplied with 3 x sanding sheets and 1.8M cable with BS plug
-
Variable speed, Hook and loop base, Dust collection box and extraction facility, Supplied with 3 x sanding sheets and 1.8M cable with BS plug
-
Constant electronics, Variable speed control, Supplied with offset combination bi-metal saw blade, hook and loop base with 3 x sanding sheets, offset scraper blade and 2M cable with BS plug
-
PZ TYPE products are compatible with *Pozidriv®/Supadriv® fixing systems. Draper TX-STAR® products are compatible with †Torx fixing systems.*Pozidriv®/Supadriv® are registered trademarks of Trifast Plc.†Torx is the registered trademark of Acument Intellectual Properties LLC
-
Screwdrivers manufactured from chrome vanadium steel with a satin chrome plated finish and a magnetised tip. The screwdriver is fitted with a bi-material soft grip handle providing user comfort, even when used for prolonged periods. The handles have a hanging hole, which can be used to place a 'T' bar through when extra torque is required. Display packed.
-
Screwdrivers manufactured from chrome vanadium steel with a satin chrome plated finish and a magnetised tip. The screwdriver is fitted with a bi-material soft grip handle providing user comfort, even when used for prolonged periods. The handles have a hanging hole, which can be used to place a 'T' bar through when extra torque is required. Display packed.
-
Screwdrivers manufactured from chrome vanadium steel with a satin chrome plated finish and a magnetised tip. The screwdriver is fitted with a bi-material soft grip handle providing user comfort, even when used for prolonged periods. The handles have a hanging hole, which can be used to place a 'T' bar through when extra torque is required. Display packed.
-
Screwdrivers manufactured from chrome vanadium steel with a satin chrome plated finish and a magnetised tip. The screwdriver is fitted with a bi-material soft grip handle providing user comfort, even when used for prolonged periods. The handles have a hanging hole, which can be used to place a 'T' bar through when extra torque is required. Display packed.
-
Screwdrivers manufactured from chrome vanadium steel with a satin chrome plated finish and a magnetised tip. The screwdriver is fitted with a bi-material soft grip handle providing user comfort, even when used for prolonged periods. The handles have a hanging hole, which can be used to place a 'T' bar through when extra torque is required. Display packed.
-
Screwdrivers manufactured from chrome vanadium steel with a satin chrome plated finish and a magnetised tip. The screwdriver is fitted with a bi-material soft grip handle providing user comfort, even when used for prolonged periods. The handles have a hanging hole, which can be used to place a 'T' bar through when extra torque is required. Display packed.
-
Screwdrivers manufactured from chrome vanadium steel with a satin chrome plated finish and a magnetised tip. The screwdriver is fitted with a bi-material soft grip handle providing user comfort, even when used for prolonged periods. The handles have a hanging hole, which can be used to place a 'T' bar through when extra torque is required. Display packed.
-
Screwdrivers with a satin chrome plated finish and a magnetised tip. The screwdriver is fitted with a bi-material soft grip handle providing user comfort, even when used for prolonged periods. The handles have a hanging hole, which can be used to place a 'T' bar through when extra torque is required. Supplied with wall mountable storage rack. Display packed.
-
Screwdrivers with a satin chrome plated finish and a magnetised tip. The screwdriver is fitted with a bi - material soft grip handle providing user comfort, even when used for prolonged periods. The handles have a hanging hole, which can be used to place a 'T' bar through when extra torque is required. Supplied in robust plastic storage case. Display packed.
-
Solid brass body with hardened steel shackle. Special bumper to prevent damage to locked item. Supplied with two keys. Key blanks are available separately. Display packed.
-
Solid brass body with hardened steel shackle. Special bumper to prevent damage to locked item. Supplied with two keys. Key blanks are available separately. Display packed.
-
Laminated steel body with hardened steel shackle. Precision pin tumbler and brass cylinder. Special cover to prevent damage to locked item. Supplied with two keys. Key blanks are available separately. Display packed.
-
Laminated steel body with hardened steel shackle. Precision pin tumbler and brass cylinder. Special cover to prevent damage to locked item. Supplied with two keys. Key blanks are available separately. Display packed.
Trade Accounts Available
Part of A1 Motor Stores Network
Only the best prices for you!
