-
The Blue Spot Tools 120cc Pistol Grip Grease Gun is manufactured from zinc alloy and A3 steel and features a spring primed air piston. Ideal for service of machinery where moving parts require lubrication. Compatible with 07963 3oz (85g) multipurpose grease cartridges. Complete with a 3oz (85g) grease cartridge, nozzles and tubes.
-
The Blue Spot Tools 9 PCE Scraper Hook and Pick Set is manufactured from chrome vanadium for increased durability. The set is ideal for the removal of o-rings, seals, fuses and other items from difficult to access areas. The set comes complete with a useful range of picks in 165 and 260mm lengths from handle to tip and a 23mm scraper used for preparing and cleaning.
-
The Blue Spot Tools 5 PCE Oxygen Sensor & Thread Chaser Set is designed to be used on oxygen sensors on modern vehicles. The sockets and chasers come complete in a robust storage case. The design of the sockets enables the user to fit the sockets over the wiring harnesses.
-
The Blue Spot Tools Brake Bleeder and Vacuum Pump Kit is a multi-use testing tool for fuel, transmission, ignition and emissions systems. Manufactured from high quality material it features a steel handle with rubberised coating for increased comfort and one-handed pump action. The set is ideal for removal of air in brake fluid lines by removing the air filled fluid under a vacuum. It is suitable for all vehicle types. The replaceable O-ring cylinder gasket, rubber piston ring and valves ensure there is always an air tight fit. The easy read dial displays positive 0-760mmHg/0-30inHg, easy read dial and also up to negative 635mm Hg.
-
The Blue Spot Tools 3 PCE Hose Clamp Pliers are manufactured from heat resistant nylon. The clamps feature a locking mechanism for simple, one-handed use and the rounded jaw edges prevent damage to internal hose reinforcement. The range of sizes ensures you have the appropriate tool for securing; brake and fuel hoses (small), heater hoses (medium) and radiator hoses (large). Set includes sizes; 150mm, 180mm and 250mm.
-
The Blue Spot Tools 6 PCE Long Reach Pick and Hook Set is manufactured from carbon steel. The set is ideal for the removal of o-rings, seals and other items from difficult to access areas. The set comes complete with soft grip handles for user comfort.
-
The Blue Spot Tools Long Reach Hose Clamp Pliers feature a locking mechanism which is designed to hold the hose clamp in the open position, whilst the flexible cable and compact head allow access in hard to reach places.
-
The Blue Spot Tools 3 Piece Exhaust Pipe Expander Set is specially designed to quickly and easily straighten out clamp dents in mufflers and tailpipes. Includes handy carrying case for quick and convenient storage.
-
The Blue Spot Tools Digital Tyre Pressure Gauge is manufactured from durable ABS plastic with an LCD display. The pressure guide is suitable for the measurement of tyres. Supplied with two LR44 batteries. Measures in Bar/PSI/kPa.
-
The Blue Spot Tools HVLP Spray Gun is ideal for painting substrates with minimal wastage. The supplied nozzle (1.5mm) and operating pressure of 50psi (3.5bar) cover a pattern width of 110-250mm with reduced overspray. The cup capacity of 600ml is ideal for larger projects. Air consumption is 10CFM (283L/min). 1/4" BSP inlet.
-
The Blue Spot Tools Disc Brake Piston Spreader is designed for the separation of brake caliper pistons for the installation of new brake pads. The design ensures the pistons are retracted and released squarely to avoid any damage to surrounding elements. Can be used on single-piston, twin opposing piston and other caliper types and on most car models. Can be operated with 1/2" ratchet or 21mm spanner. Capacity 0 - 65mm.
-
The Blue Spot Tools 3/8" Motorcycle Spindle Tool (17, 19, 22 & 24mm) is ideal for removing hollow wheel spindles. Suitable for use on a wide range of motorcycles.
-
The Blue Spot Tools 21 PCE Wind Back Brake Caliper Kit is a comprehensive set that features all of the adaptors needed for working on brake calipers for vehicles such as Alfa-Romeo, Audi, BMW, Citroen, Ford, Honda, Jaguar, Land-Rover, Subaru, Mazda, Mercedes, Mini, Mitsubishi, Nissan, Renault, Open/Vauxhall and more. The set is complete with left and right threaded winding tools for cars that have brake calipers that wind either left or right. The set is manufactured from hard-wearing Carbon Steel. Complete with a handy carrying case for quick and convenient storage.
-
The Blue Spot Tools Motor Cycle Chain Breaker is used for the repair, splitting and riveting of new and old motorbike chains. The Chain Breaker is made from heat-treated, hardened steel and can be used with chain pitches from 35 to 630. Heavy-duty chains will require the pinheads to be ground off prior to breaking. Four push pin sizes for various chain pitches. The square design can easily be bolted to a work surface, fastened in a vice, or held by hand. Handle winds push pins to remove rivets from chain links for alteration and the same action is used to replace the rivets once desired length is obtained with the use of the adaptor press plate and riveting and pin anvil. Rivets and other consumables are sold separately. The kit comes in a handy carrying case for quick and easy storage
-
The Blue Spot Tools 23 PCE Wheel Bearing Removal Kit is manufactured from hardened steel with a blackened phosphate coating for increased durability and corrosion resistance. This set reduces any chance of accidental damage to the bearing and hub. It is also suitable for installing and removing large industrial bearings. Perfect for use in either domestic or imported front-wheel-drive cars and light trucks. This set eliminates any need for front end alignment following completion of work. The kit comes complete in a blow molded case to allow for convenient storage and transport.
-
The Blue Spot Tools 17 PCE Bearing Race and Seal Driver Kit is suitable for the installation of straight races and seals into brake disc hubs without damage to the bearing or axle housing. The collars will fit most standard wheel bearing sizes, including 4x4 vehicles and are made from machined aluminium. The kit comes in a handy carrying case for quick and easy storage. There are three driver sizes are used with a small hammer to insert the new straight race into the brake disc hub. The adaptor should sit snugly within the race with minimal movement to avoid any damage to the axle housing. The seal can then be installed once the bearing placed within the race with the same sized adaptor and hammer.
-
The Blue Spot Tools 4 PCE Sheet Metal Butt Welding Clamps are manufactured from carbon steel for increased durability. Suitable for clamping flat or curved sheet metal panels to each other. Simple and easy to
-
The Blue Spot Tools 3 Piece Magnetic Tool Holder Set features high strength magnetic bars ideal for organising and storing tools. Ideal for use in the workshop, garage or at home. Quick and easy wall mounting and includes all fixings.
-
The Blue Spot Tools 100mm (4"Â) Stainless Steel Magnetic Dish is a useful tool for keeping parts safe when working. The magnetised dish can be used on its side as well as upside down. The base is rubberised so you can use on body panels without causing damage.
-
The Blue Spot Tools 2 PCE Inspection Mirror And Pickup Tool both feature a telescopic design. The inspection mirror is specially designed with 360° rotation for easy adjustment and an all round view. The inspection tool features a high strength magnet for a secure hold. Maximum magnetic lift on the inspection tool: 1.3kg / 3lb. The inspection mirror extends from 195mm to 540mm. Pick up tool extends from 145mm to 560mm.
Trade Accounts Available
Part of A1 Motor Stores Network
Only the best prices for you!
