DRB CAR SPARES STOCK A FULL RANGE OF WELDING TOOLS AND ACCESSOIRES
Equipment for welding. GYS offer one of the largest ranges of welding machines, accessories and consumables for all potential users, from the most advanced applications in industry to general maintenance and repair uses.
-
The anti-arc protection preserves the electronics of a vehicle by absorbing the overvoltage peak during welding operations or vehicle interventions. Green LED on: Normal use, the protection is activated. Red LED on + buzzer sounds: The unit has absorbed an important overvoltage and the vehicle is no longer protected. It is necessary to replace the anti-arc protection to protect again the electronics of the vehicule.
-
Bag of 10 contact tips for Ø0.6 150/250/300A torch
-
Bag of 10 contact tips for torch 150A Ø 0.8
-
Bag of 10 contact tips for Torchs 150 A. Ø 1
-
EARTH CLAMP CROCO A200.35 (200A / 35mm²) - on card
-
Welding gloves in cowhide leather with inner lining against heat. Material: cowhide leather. - American type with webbed thumb. - Major and annular separately applied (sewn separately to the rest of the palm). - Cuff fully lined with cotton canvas. - Edging on the edge of the cuff
-
Essential for safety, the VENUS 9/13 G optoelectronic hood protects the welder’s face and eyes from UV, infrared and splashes. Fully automatic, the mask switches from clear to tinted state in a fraction of a second as soon as it is primed. Comes with a headband, it frees the welder’s hands and offers all the necessary comfort for welding work.
-
Essential for safety, the TECHNO 11 TRUE COLOR optoelectronic hood protects the welder’s face and eyes from UV, infrared and splashes. Fully automatic, the mask switches from clear to tinted state in a fraction of a second as soon as it is primed. Comes with a headband, it frees the welder’s hands and offers all the necessary comfort for welding work.
-
Essential for safety, the TECHNO 9/13 TRUE COLOR optoelectronic hood protects the welder’s face and eyes from UV, infrared and splashes. Fully automatic, the mask switches from clear to tinted state in a fraction of a second as soon as it is primed. Comes with a headband, it frees the welder’s hands and offers all the necessary comfort for welding work.
-
Universal rutile electrode, designed for welding in any position, including vertical down welding. It is easy to ignite and offers an excellent weldbead aesthetics. It is recommended for general construction of non-alloy and low alloy steel.
-
Universal rutile electrode, designed for welding in any position, including vertical down welding. It is easy to ignite and offers an excellent weldbead aesthetics. It is recommended for general construction of non-alloy and low alloy steel.
-
Universal rutile electrode, designed for welding in any position, including vertical down welding. It is easy to ignite and offers an excellent weldbead aesthetics. It is recommended for general construction of non-alloy and low alloy steel.
-
Filler wire for welding carbon steels and manganese carbon steels without gas. It is mainly used for thin pieces of metal (< 5 mm). This type of wire is well suited for galvanised materials. However it is not recommended when pressure is high.
-
This solid, copper-coated wire is for gas welding non- and low-alloy carbonated steel. It has many useful applications in metal construction due to its excellent mechanical properties.
-
This solid, copper-coated wire is for gas welding non- and low-alloy carbonated steel. It has many useful applications in metal construction due to its excellent mechanical properties.
-
TIG steel filler metal in rods. Classification: AWS A5.18: ER70S-6 EN ISO 636A: W46 4 W3Si1 DIN 8559: WSG 52 Applications: For penetration passes in pipework.
-
TIG steel filler metal in rods. Classification: AWS A5.18: ER70S-6 EN ISO 636A: W46 4 W3Si1 DIN 8559: WSG 52 Applications: For penetration passes in pipework.
-
TIG Stainless steel filler metal 308L in rods for welding austenitic stainless steels without molybdenum (304, 304L, 321, 347). Classification: AWS A5.9 : ER 308L EN ISO 14343-A: W 19 9 L Applications: Pipes, structures with thicknesses of 3mm or less and for penetration passes. For use with assemblies preheated to temperatures less than 350°C.
-
TIG Stainless steel filler metal 308L in rods for welding austenitic stainless steels without molybdenum (304, 304L, 321, 347). Classification: AWS A5.9 : ER 308L EN ISO 14343-A: W 19 9 L Applications: Pipes, structures with thin thicknesses of 3 mm or less and for penetration passes. For use with assemblies preheated to temperatures less than 350°C.
-
TIG Stainless steel filler metal 308L in rods for welding austenitic stainless steels with and without molybdenum (316, 316L, 316 Ti/Nb304, 304L). Classification: AWS A5.9 : ER 316L EN ISO 14343-A: W 19 12 3 L Applications: Pipes, structures with thicknesses of 3mm or less and for penetration passes. For use with assemblies preheated to temperatures less than 400°C. Good resistance to corrosion.
-
TIG Stainless steel filler metal 308L in rods for welding austenitic stainless steels with and without molybdenum (316, 316L, 316 Ti/Nb304, 304L). Classification: AWS A5.9 : ER 316L EN ISO 14343-A: W 19 12 3 L Applications: Pipes, structures with thicknesses of 3mm or less and for penetration passes. For use with assemblies preheated to temperatures less than 400°C. Good corrosion resistance.
