-
• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use. • Manufactured from hardened and tempered drop-forged Chrome Vanadium steel. • Finely ground polished heads. • Serrated jaws and precision ground cutting edges, induction-hardened 55-65 HRC for cutting hard and soft wires. • Dual material comfort grip handles. • Contents: 105mm End Cutters, 115mm Side Cutters, 115mm Combination Pliers, 125mm Bent Nose Pliers, 125mm Long Nose Pliers, 145mm Needle Nose Pliers. • Lifetime guarantee*.
-
• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use. • High quality Chrome Molybdenum steel driver shafts. • Contoured handle with soft rubber grip for added control, includes hanging holes. • Spinner top enables fingertip control of driver. • Shot blasted and blackened tips. • Contents: T5, T6, T7, T8, T10, T15. • Lifetime guarantee*.
-
• COMPETITIVELY PRICED - EOBD code reader. • OBDII/EOBD COMPLIANT VEHICLES - Petrol 2001 and Diesel 2004 onwards. • CAN ENABLED - Retrieves generic P0, P2 and P3 and U10 codes and picks up manufacturer specific P1, P3 and U1 codes. • THIS EASY TO USE TOOL - Will then turn off the MIL light, clear codes and resets monitors. • COMPREHENSIVE INSTRUCTIONS - Supplied.
-
• The Autel AL419 enables fast and easy-access to any vehicle’s EOBD (Petrol 2001on and Diesel 2004on) diagnostic codes and enables the cause of the illuminated engine check light (MIL) to be established. • Built-in data library with lookup function. • Clear, concise DTC definitions generic to all EOBD compliant vehicles. • CAN enabled, retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes. • Unit then turns off MIL light, clears codes and resets monitors. • Additionally, will read and display the live ECU/PCM data stream. • Gives a live display of O2 sensor data. • Updateable via web with USB cable included and will link with a PC, enabling printing of stored data. • Patented One-Click I/M Readiness button to eliminate drive cycle guesswork using colour-coded LEDs and audible tone. • Supports the new extended sensor list (SAE J1979 2007). • Loaded with troubleshooter code tips and repair information.
-
Steel cable tie holder. • Attaches to any ferrous surface. • Three compartments for varying lengths of cable ties. • Three magnetic fixings with rubber pads to prevent slipping. • Industrial powder coated finish. • Supplied with 200 cable ties in three sizes – 100, 160 and 300mm.
-
• Steel cable tie holder. • Attaches to any ferrous surface. • Three compartments for varying lengths of cable ties. • Three magnetic fixings with rubber pads to prevent slipping. • Industrial powder coated finish. • Supplied with 200 cable ties in three sizes – 100, 160 and 300mm.
-
• Folding design saves space and makes these axle stands ideal for occasional use. • Welded steel construction for increased strength and safety. • Folding design for space efficient storage. • Fitted with double-locking safety pin. • Sold in pairs.
-
- Ball point end on the long key end giving access at angles of up to 25°
- Ideal for use in confined spaces
- Regular hex end on the short arm giving the ability to apply higher torque
- Chrome vanadium steel with a black finish
- Each key can be easily removed or used by simply twisting in it's individual holder
- Supplied with a folding plastic holder to keep the keys together
-
• Composite reel with fully enclosed cable and 4 x 230V power sockets. • Fitted with 3-pin plug and thermal trip. • 10m 3 x 1mm² PVC cable. • Built-in carry handle.
-
• Compact bench grinder with powerful induction motor for general workshop use. • Supplied with spark arrestors, tool rests and eye shields. • Supplied with coarse and fine aluminous oxide grinding stones for general workshop grinding and sharpening. • 150W/230V, 2980rpm.
-
- 25mm long screwdriver, hex and TX bits to suit different applications
- Reversible mini bits ratchet
- Supplied a bits box with a click lock lid and small enough to easily fit in the pocket
-
Sale!The Blue Spot Tools 9 PCE 1/2" Impact Torx Bits (T30-T70) are manufactured from S2 Steel for increased durability and strength. The set includes the most widely used torx sizes and are ideal for removing and applying torx fittings. The bits are heat-treated, hardened and tempered.
-
Sale!The Blue Spot Tools Green PVC Electrical Tape is designed for the general binding and insulation of electrical wires. Conforms to BS EN 60454. For both internal and external use. Width: 19mm / Length: 20M.
-
The Blue Spot Tools 120 PCE Assorted Mixed Colour Cable Ties are heavy-duty, self-locking and ideal for use around the home and workplace. Manufactured from heat resistant nylon 66. Each pack contains 120 assorted mixed colour cable ties.
-
The Blue Spot Tools 12 PCE 1/2" Metric Ratchet & Socket Set (10-24mm) is manufactured from high quality chrome vanadium for increased durability. The set is heat treated, hardened, tempered and fully polished. Features soft grip handle for increased comfort and knurled sockets to provide a secure grip.
-
The Blue Spot Tools 12 PCE 1/2" Metric Ratchet & Socket Set (10-24mm) is manufactured from high quality chrome vanadium for increased durability. The Bluespot company is a premier supplier of hand tools and power tools. You can buy quality Bluespot Tools including the BLUESPOT 12PC 1/2" SOCKET SET from DRB Car Spares.
-
The Blue Spot Tools 13 PCE Torx Socket Bit Set (T8-T70) (1/2", 3/8", 1/4") is manufactured from chrome vanadium for increased durability. Features knurled sockets to provide a secure grip. Complete with a useful carrying case for quick and easy storage.
-
The Blue Spot Tools 8 PCE 1/2" Impact Torx Sockets (T30-T80) are manufactured from heat-treated, tempered chrome molybdenum for strength and durability. Blackened phosphate coating to protect against corrosion. Ideal for use with impact guns and high torque tools. Contains socket sizes: T30, T40, T45, T50, T55, T60, T70, T80. Complete with a handy carrying case for quick and easy storage.
-
The Blue Spot Tools 8 PCE 1/2" Impact Hex Sockets (H5-H19) are manufactured from heat-treated, tempered chrome-molybdenum for strength and durability. Blackened phosphate coating to protect against corrosion. Ideal for use with impact guns and high torque tools. Contains socket sizes: H5, H6 H8, H10, H12, H14, H17, H19. Complete with a handy carrying case for quick and easy storage.
-
The Blue Spot Tools 7 Piece 3/8" Extra Long Ball Ended Hex Socket Bit Set is manufactured from chrome vanadium for increased durability. Features an extra-long 110mm shaft for accessing hard to reach areas that conventional bits cannot reach. The hex socket set also features a ball ended tip for a tighter fit and a secure grip.
Trade Accounts Available
Part of A1 Motor Stores Network
Only the best prices for you!
